Acrylic Chemical Resistance for Enclosures
Chemical resistance cannot be decided from a generic 'compatible' label. Exposure concentration, temperature, duration, applied stress and fabrication…
Read articleTechnical Blog
Acrylic Fabrication Insights
Practical guides on materials, tolerances, guarding and design — written by the engineers who quote and machine the parts.
CNC Milling vs Laser Cutting Acrylic
Use laser cutting for efficient 2D profiles and engraving when its edge, taper and heat-affected appearance meet the drawing. Use CNC milling for…
Read article
Designing Acrylic Dust Covers for Equipment
A dust cover should be designed around the contamination path and maintenance task. First decide whether the cover only blocks falling dust, slows…
Read article
Acrylic Machining Defects: A Diagnostic Guide
Treat a machining defect as evidence, not as a reason to change every setting. Melted smear points toward heat generation or poor chip evacuation;…
Read article
Machine Guard Standards: OSHA, ISO and ANSI
OSHA regulations, ISO standards and ANSI standards do not play identical roles. In the United States, OSHA rules are enforceable requirements;…
Read article
Acrylic CNC Feeds and Speeds: Starting Guide
There is no safe universal feed-and-speed table for acrylic. Start from cutter diameter, flute geometry, tool manufacturer data, spindle limits,…
Read article
Machine Guard Visibility: Clarity, Glare and Access
Visibility is a system property. Material clarity matters, but glare, surface scratches, panel angle, lighting, frame placement and viewing distance…
Read article
Acrylic CNC Workholding and Fixture Design
A good acrylic fixture spreads load, supports thin areas and exposes the required tool path without forcing the part flat. Vacuum works well for…
Read article
ESD Acrylic Enclosures: When Antistatic Is Needed
Specify ESD acrylic only when the product, process or facility risk assessment defines an electrical-performance need. 'Antistatic' is not a complete…
Read article
Annealing Acrylic After Machining
Annealing is a risk-control step, not an automatic cure for poor machining. It is most relevant when a machined part carries residual stress and…
Read articleHave a project to price?
Send a drawing, STEP file or sketch and get a quote or DFM feedback within 12 hours.